Round Tapered Aluminum Poles

The lighting standards listed here are designed for ground-mounted applications. Standards mounted on structures require factory consultation. All of our products are available as direct-burial poles — contact our Project Management team for exact catalog numbers and pricing of such poles.

Pole Shaft

The shaft is spun tapered from all new seamless 6063 alloy aluminum tubing and heat treated to produce a T6 temper. It is gracefully cone tapered to the butt diameter. Each shaft has a 6″-long straight section at the top that may be drilled to the luminaire manufacturer’s mounting specifications. An Aluminum tenon may also be supplied as standard.

Anchor Base

Cast from A356 alloy aluminum, the anchor base is heat treated to produce a T6 condition and inserted into the anchor base casting. The two pieces are joined by a continuous circumferential weld at the outside top and inside bottom of the anchor base. The anchor bolts and nuts recess in the base casting, sitting flush, and are covered by four (4) tamper-resistant aluminum nut cover discs.

Ready for a Quote?

Are you a General Structures, Inc. sales partner? You can fill out this form to request a quote.

If you’re not already working with a sales representative, click here to find the rep for your area.

For product details and pricing, log into PoleVault™ to download our product catalog.

Product Line

  • CPA-2-4012-10
  • 10
  • CPA-2-5012-10
  • 10
  • CPA-2-4012-12
  • 12
  • CPA-2-5012-12
  • 12
  • CPA-2-4012-14
  • 14
  • CPA-2-5012-15
  • 15
  • CPA-2-5015-15
  • 15
  • CPA-2-5012-18
  • 18
  • CPA-2-6015-18
  • 18
  • CPA-2-5015-20
  • 20
  • CPA-2-6015-20
  • 20
  • CPA-2-7015-20
  • 20
  • CPA-2-7015-25
  • 25
  • CPA-2-8015-25
  • 25
  • CPA-2-8015-30
  • 30
  • CPA-2-8018-30
  • 30
  • CPA-2-8025-30
  • 30
  • CPA-2-8018-35
  • 35
  • CPA-2-8025-35
  • 35
  • CPA-2-8025-39
  • 39
Catalog NumberMounting HeightEffective Projected AreaShaft DimensionsBase InfoBase PlateCutsheetTemplate
8090100120ButtTopWallAnchor Bolt DiameterBolt CircleSquareHeight
CPA-2-4012-101010.17.45.73.4430.125.75 x 206.759.621.88View View
CPA-2-5012-101016.112.49.96.2530.125.75 x 207.7510.621.88View View
CPA-2-4012-12127.25.33.92430.125.75 x 206.759.621.88View View
CPA-2-5012-121212.59.57.44.7530.125.75 x 207.7510.621.88View View
CPA-2-4012-14145.33.82.71.6430.125.75 x 206.759.621.88View View
CPA-2-5012-15158.76.653.3530.125.75 x 207.7510.621.88View View
CPA-2-5015-151511.18.46.84.5530.156.75 x 207.7510.621.88View View
CPA-2-5012-18185.74.131.8530.125.75 x 207.7510.621.88View View
CPA-2-6015-181811.69.37.44.7630.156.75 x 208.7511.621.88View View
CPA-2-5015-20206.24.331530.156.75 x 207.7510.621.88View View
CPA-2-6015-202010.17.55.83.7630.156.75 x 208.7511.621.88View View
CPA-2-7015-202015.912.29.76.274.50.1561 x 4010.511.283.38View View
CPA-2-7015-252510.37.65.93.774.50.1561 x 4010.511.283.38View View
CPA-2-8015-252515.311.79.25.784.50.1561 x 4011.5123.5View View
CPA-2-8015-303010.27.75.93.584.50.1561 x 4011.5123.5View View
CPA-2-8018-303013.310.47.9584.50.1881 x 4011.5123.5View View
CPA-2-8025-303019.414.911.77.484.50.251 x 4011.5123.5View View
CPA-2-8018-35359.26.85.12.884.50.1881 x 4011.5123.5View View
CPA-2-8025-353514.110.78.34.984.50.251 x 4011.5123.5View View
CPA-2-8025-393910.87.96.13.384.50.251 x 4011.5123.5View View
 

EPA ratings include a 1.3 gust factor.

Anchor bolts should be set using factory-supplied anchor bolt templates.

Vibration dampeners are suggested for poles 30′ and longer.

About Us

General Structures, Inc. has been the best partner for C&I lighting standards since 1988. We adhere to standards set forth by AASHTO, ASTM International, and NEMA and weld all of our products to the highest American Welding Society standards.

Read more